Manualshelf

Operation Manual

ManualsBrandsTaggle Systems ManualsElectronics922MHz DSSS Transmitter Module
123
Page 3 of 3
3 Compliance Test Software
Open the provided software RfComplTest.exe
It will prompt you to choose the serial port, select the port noted from the previous step.
Note: If you have chosen the incorrect port the program will close.
1. Select “Set to BPSK Output” and hit “OK”. The module will begin to transmit modulated
output continuously.
2. Select “Reset test mode” and hit “OK” to halt transmission.
The board is powered through the USB. If you have any issues you can reset it by disconnecting
and reconnecting the USB.