Installation Guide

ManualsBrandsTaggle Systems ManualsComputers & AccessoriesThe Taggle Cockatoo product range is a modular Radio Telemetry Unit (RTU) for connection to IoT devices. Models CK2-T1-I and CK2-T1-C incorporate a proprietary 922MHz DSSS radio which operates under FCC part 15.247 rules.

Page 16 of 54

8 Cockatoo Operating Specifications

These tables are subject to update without notice.

Processing and Interface

MCU

Onboard MCU

Operating modes

Flight mode (standby with no radio transmission.)

Operational mode

Sensor interface types

(Selected at time of

manufacture)

Pulse Counter

Rain Gauge

4-20mA

Single Float

Dual Float

RS-232

RS-485/Modbus

SDI-12

Analogue (pending)

Encoder UI-1203 (pending)

NFC

Field readable and reprogrammable – installation and

configuration. (Requires Taggle approval)

Telemetry Behaviour

Sampling

Configurable by Taggle at manufacture or installation via NFC

Alarms

Configurable by Taggle at manufacture or installation via NFC

Transmission

Configurable by Taggle at manufacture or installation via NFC

Physical Details

Dimensions

213mm (L) x 96mm (D)

Weight (approx.)

Approximately 1 kg

(Varies dependent on number of batteries fitted)

Enclosure Material

Ultradur PBT

Ingress Protection

Cockatoo: IP68 Hermetically sealed

Connectors: IP67

Temperature

-10°C to 60°C

(Average temperature not to exceed 30°C)

Connectors

Sensor connector (S)

Stainless Steel M-12 A coded female jack

Power connector (P) (optional)

Stainless Steel M-12 A coded male jack

External antenna (A) (optional)

Stainless steel SMA female jack