Manualshelf

Installation Guide

ManualsBrandsTaggle Systems ManualsComputers & AccessoriesThe Taggle Cockatoo product range is a modular Radio Telemetry Unit (RTU) for connection to IoT devices. Models CK2-T1-I and CK2-T1-C incorporate a proprietary 922MHz DSSS radio which operates under FCC part 15.247 rules.
11121314151617181920
Page 18 of 54
9 Connector Jacks
The Cockatoo has up to three connector jacks on the base of unit, depending on the
configuration. The connector jacks are –
• Sensor connector jack (S) (default on all variant)
• Power connector jack (P)
o (optional) External power connector jack
o (optional) Dual float device – second float
• External antenna connector jack (A) (optional)
9.1 Connector Jack Layout
To properly orientate the base of the Cockatoo, ensure the bracket mounting lug in the base of
the unit is at the top when the Cockatoo is lying on its side. The image in Figure 2 – Base view
of the Cockatoo and it’s connector jacks.
Figure 1- Angled view of the Cockatoo from the rear of the device
Figure 2 – Base view of the Cockatoo and it’s connector jacks
Bracket mounting lugs
Bracket mounting lug
Antenna connector – A (optional)
Sensor connector - S
Power connector - P (optional)
Base View
Angled view from rear