Manualshelf

Installation Guide

ManualsBrandsTaggle Systems ManualsComputers & AccessoriesThe Taggle Cockatoo product range is a modular Radio Telemetry Unit (RTU) for connection to IoT devices. Models CK2-T1-I and CK2-T1-C incorporate a proprietary 922MHz DSSS radio which operates under FCC part 15.247 rules.
11121314151617181920
Page 20 of 54
9.3 Jacks
The connector jacks on the base on the Cockatoo will vary based on the model and its
specifications. The provided connectors are different for each connector jack to aid correct
assembly.
Jack
Location
Mating Plug
Sensor Jack
S
(refer to
diagram)
Male Plug
Power Jack
P
(refer to
diagram)
Female Plug
External
Antenna
A
(refer to
diagram)
SMA male
(Not supplied)
9.3.1 Power Connector (Model CK2-*-*-EXT)
Cockatoo models with the EXT option are powered from an external 9-30V DC power supply.
The power is connected via the Power jack (location P) using the supplied female plug.
Ensure the supply voltage is between 9 and 30 volts DC at 1.5 amps.
Power Connector
Connector Pin
Cockatoo
1
9 to 30 Volt DC
2
NA
3
GROUND
4
NA
5
NA
Ensure the external power supply is wired to the P Jack only.
Sensor Jack (S)
Power Jack (P)
Bracket mounting lug
Antenna Jack (A)