Manualshelf

Installation Guide

ManualsBrandsTaggle Systems ManualsComputers & AccessoriesThe Taggle Cockatoo product range is a modular Radio Telemetry Unit (RTU) for connection to IoT devices. Models CK2-T1-I and CK2-T1-C incorporate a proprietary 922MHz DSSS radio which operates under FCC part 15.247 rules.
21222324252627282930
Page 24 of 54
10 Mounting bracket
Each Cockatoo ships with a stainless-steel mounting bracket, which attaches to the rear of the
Çockatoo and locks into the base.
Bracket Anatomy
The mounting bracket has been engineered to securely lock onto the body of the Cockatoo
with two teeth at the top and two teeth at the base. Two slits on the side of the bracket are for
a stainless-steel hose clamp to firming hold the body of the Cockatoo onto the bracket.
Dimensions
Value
Height
126mm (5 inch)
Width
68mm ( 2.7inch)
Steel Thickness
2mm
Holes
M5
Slots
M5 x 20mm
Top
Bottom
Top mounting lugs
Bottom mounting lugs
This side faces the Cockatoo
Mounting holes and slots
Twos slots for the hose clamp
This side faces the wall or post
Bottom
Figure 8 - Front face of
bracket
Figure 6 - Rear side of
bracket
Figure 9 - Base of bracket showing lugs
Figure 7 - rear side of bracket showing mounting
lugs locked into Cockatoo.
Plastic Referencing lug
Mounting holes/slots (green)