Installation Guide

Page 33 of 54
• If you don’t have access to the Survey Tool, please contact or email your Reseller
Representative or
o if in Australia contact your Taggle Representative or [e-mail].
o if in USA, North or South America contact [e-mail]
o Your request will require the following details: as an example
▪ Name: John Smith
▪ Email: [e-mail]
▪ Company: Council Name
▪ Job Title: AMR Installer
▪ Your Reseller’s name: ACME Water Solutions
▪ Phone Number: 0404 000 000
11.2.2 Satellite Radio Test the proposed mounting location
Purpose
Validate the Cockatoo satellite radio is functioning and can confirm its GPS location.
Requirement Items
• NFC enabled phone or tablet
• NFC Reader App (refer to Appendix – NFC Application for example)
• Sensor with Cockatoo connector properly attached to the sensor cable.
• Cockatoo
Action
1. Connect sensor cable to the Cockatoo. The Cockatoo CANNOT leave FLIGHT mode
without a sensor connected.
2. Position the Cockatoo at the proposed location for radio test.
3. Wake up the Cockatoo
• Open your NFC Tools app or similar app on the mobile phone
• Select READ and then Tap the phone over the letter “a” on the Taggle logo on the
Cockatoo, as per image below.
• You should be presented with a dialog box and a tick symbol. This indicates a
successful NFC interaction with the Cockatoo.
• Sequence of Actions below -