Manualshelf

Installation Guide

ManualsBrandsTaggle Systems ManualsComputers & AccessoriesThe Taggle Cockatoo product range is a modular Radio Telemetry Unit (RTU) for connection to IoT devices. Models CK2-T1-I and CK2-T1-C incorporate a proprietary 922MHz DSSS radio which operates under FCC part 15.247 rules.
31323334353637383940
Page 35 of 54
11.3 Step 3 - Fix the Cockatoo bracket
Purpose
Securely mount the bracket to a solid structure or location to ensure no movement.
Requirement Items
• 4 x M5 bolts or screws
• Cockatoo bracket
• Other mounting accessories (as required for location)
Action
1. Practice sliding the Cockatoo into the bracket before fixing the bracket to the
wall/mounting location, as aligning the bottom teeth of the bracket to the Cockatoo can be
tricky.
2. Fix the bracket to the mounting location using the available holes or slots (green dots) in
diagram below
11.4 Step 4 - Fasten the Cockatoo to the bracket
Purpose
The installer needs to mate the two upper teeth of the bracket into the mounting holes in the
top of the Cockatoo, whilst ensuring the teeth at the bottom of the bracket mate with the lug on
the base of the Cockatoo.
Action
1. Slide the Cockatoo into the upper and bottom teeth of the bracket. Ensure the Cockatoo is
slid vertically into the bracket to ensure the bottom teeth can properly mate with the lug.
2. Insert the and tighten the hose clamp.
Figure 15 - Sliding the Cockatoo into the Bracket