Installation Guide

Page 42 of 54
Appendices
Appendix – NFC Application
Cockatoo will not exit FLIGHT mode
To exit FLIGHT mode the Cockatoo must have a sensor connected. Provided the
Cockatoo has sufficient internal or external power, once a Cockatoo has been placed in
OPERATIONAL mode, it will stay in this mode (even if the sensor connector is
disconnected.)
Confirming the GPS Lock on the Cockatoo Satellite
With the NFC Tool app open on the phone select READ again and tap the “a” location on
the Taggle logo. You should be presented with a dialog box and a tick symbol. Once the
tick dialogue box disappears, click on the Record 1- Text section (red oval below), and
scroll down to the Value: section and confirm the following conditions.
• Device Mode ➔ reads “OPERATIONAL”
• Tx Count: ➔ reads any number greater than 1
• GPS LOCK: ➔ reads “1”