User's Manual

Page 6 of 11
6) Radio Test Mode
The PARAKEET SENSUS can be set into Radio Test Mode by one of two methods. Essential
for confirming radio performance at installation.
The first method involves activation of an internal reed switch using a magnet presented over
the indicated label below - referred to as a “SWIPE”. The second method is triggered by
presenting an NFC reader over the labelled area – referred to as a “TAP”. Both these locations
are marked below on the endpoint housing.
A Swipe or a Tap will cause the device to immediately transmit a burst of packets, to aid field
testing during device installations and PRIOR to the connection of the Encoder/Register. This
means that every endpoint can be used as a Survey Tool to test for connection to the Taggle
Network. Access to this survey tool page will be granted by Taggle Systems.
7) Out of the Box
The endpoint is shipped in Flight Mode whereby it does not transmit. This serves multiple
purposes including ensuring maximum battery life and meeting safety restrictions relating to
shipping radio transmitters.
Swipe circled area with a magnet
Tap device over labelled area
containing the Endpoint
Serial Number. Ensure NFC
is turned ON on your device.
Magnet “Swipe” and NFC “Tap”
locations