User Manual

Library Security Pedestal 2
34/62 Revision 4.2 July 2008
5.4.2 Basic Configuration
Double-click on the application shortcut to start the application.
By default, the application searches for a serial L-SP2 connected to the COM Port 1.
If no L-SP2 is detected on this COM Port, the following window is displayed:
Figure 16: Main Configuration Window, not connected to the L-SP2
Select the COM Mode for your L-SP2 between Serial and Ethernet.
 If Serial then select the Com Port (1 to 8 available)
 If Ethernet then enter its address and TCP port
Alarm
: icon lights ON
when EAS is detected
Connection
status
Counter Icon
:
light ON if counter is
incremented or beam crossed