User Manual

Configuration
July 2008 Revision 4.2 35/62
Click “Reset Com” to establish communication to the L-SP2. If settings are correct the following
window is displayed:
Figure 17: Main Configuration Window, connected to the L-SP2
Reset Com
Reset the communication to the pedestal regarding Com Mode, Com Port and IP/Port settings.
Release Com
Release the communication to the pedestal. (Get back to Figure 16 )
Chips
Select the chips to be detected
Read Memory
When selected, the L-SP2 will try to read memory of items passing through the gate. 1 block = 32
bits, maximum 8 blocks.
Use AFI / Use EAS (ISO15693 only)
Selected which mode you want to use to detect an ISO15693 item.
First Block (ISO15693 only)
First memory block to be read (in the range from 0 to 7).
Nb Blocks (ISO15693 only)
Number of blocks to be read (in the range from 1 to 8).
Once the communication is set and the system identified, the software displays the current
configuration recorded in the L-SP2.