User Manual

Library Security Pedestal 2

36/62 Revision 4.2 July 2008

Lowest Block First (ISO15693 only)

Activate this option if you want the lowest memory block to be presented first in the database

Synchro

 Select whether the pedestal is to be configured as the Master or as the Slave (1, to …8)

 Pedestal Number: set the total number of pedestals (master + slaves) in close proximity

and sharing the same ID.

 Select ID (same ID for Master and slaves for one system installation)

This parameter is the identifier of the Master and when a pedestal is configured as a Slave

it is the Master’s ID that the slave will answer to. For a Master/Slave system it is mandatory that all

the pedestals use the same ID.

In the library configuration example below we have:

 system A with ID = 1 (M1 Master, S1, S2, S3 Slaves)

 system B with ID = 2 (M2 Master, S1, S2 Slaves)

The Masters are disposed as far as possible from each other not to perturb themselves. (Please

refer to section 4.3.2 “Placement of Pedestals").

Two different IDs to be sure that each slave will be synchronized with the master from its own

system.

Figure 18: Multi-gate Configuration with 2 different Ids

Alarm

Select alarm time (using a time step of 0.5 s. From 0.5 to 5 s)

Resume Detection

Click the button to stop EAS/AFI detection. Another click resumes EAS/AFI detection.

Only one Master can be selected with several slaves.

System A

With

ID = 1

System B

With

ID = 2

Nearby proximity

area with

interferences

S1 M1 S2