User Manual

Configuration
July 2008 Revision 4.2 37/62
Once you have set the basic configuration check that all the slaves are well synchronized. To do
so, L-SP2 electronics unit green LEDs should flicker cyclically. If not, proceed to the advanced
configuration stage.
Database
Each time an item (with EAS/AFI activated) passes through the gates an entry is added to a local
database in L-SP2 memory. This entry holds the following information:
 The date and time to which the theft was committed.
 The chip type (C220/C320, C370, C370-L, ISO15693).
 If selected, the memory data.
The database section shows the number of entries stored in L-SP2 memory in real-time.
Access Database
To access the database, click “Access Database”: Database is downloaded and the following
window is displayed:
Figure 19: Database
Click:
 “Refresh” to re-download Database.
 “Clear” to ERASE L-SP2 Database.
 “Close” to close the window.
You can access the database from your own application using MedioSTX.dll and Java SDM.
Please refer to the Medio STX Windows DLL Programming Guide.
CAUTION: When this window is open EAS/AFI detection is automatically suspended. It is
resumed when the window is closed.