User Manual

Library Security Pedestal 2
42/62 Revision 4.2 July 2008
5.5 People Counter Management
The people counter information reported using the Ethernet connection is battery backed-up.
It is not the case for the LCD display. If powered off, the information displayed on the LCD display
will be reset to zero.
5.5.1 Resetting the Local People Counter
To reset the LCD display use a pointed element (for example: a paper clip). Insert it in the hole
under the display window and press (not too strong) until you get zero displayed. This will not reset
the battery backed-up counter.
Figure 24: People Counter and Sensor
5.5.2 Resetting the Remote People Counter
Connect to the L-SP2 using “L-SP2 Configuration” and click “Reset people counter”. This will
only reset the battery backed-up counter, not the LCD display.
Counter window
IR Sensor
LCD Reset