User Manual

Library Security Pedestal 2
54/62 Revision 4.2 July 2008
8.3 Upgrading the DSP Firmware
DSP Firmware upgrade is carried on via the L200 Explorer software using either the RS232
cable or the Ethernet interface.
Please see L200 Explorer user's guide for more details about upgrade process.
8.4 Spare Parts
A complete list of spare parts is available upon request.
CAUTION: While upgrading the DSP Firmware, the serial cable or the Ethernet interface
MUST NOT be disconnected or the L-SP2 pedestal will not be functional anymore. In the case
this would occur, the Firmware will HAVE TO BE programmed with the L200 Explorer
software using the parallel port located in the electronic housing.