User Manual
Library Security Pedestal 2
56/62 Revision 4.2 July 2008
10 Technical Specifications
10.1 Mechanical Data
Parameter Value
10.2 Electrical Data
Parameter Value
10.3 RF Output Power (50Ω
ΩΩ
Ω Terminated)
Measurement values are instantaneous as the Power Burst is of very low duty cycle (0.015).
Power on for approximately 400 µs every 60 ms at 50 Hz.
Parameter P (W) P (dBm) V (V
RMS
) V (V
PP
)
Minimum Burst Power 3.6 36.6 13.4 38
Maximum Burst Power 4 36.0 14.1 40.0
10.4 I/O port
The 4 I/O ports available are used as follows:
1: OUTPUT, used to trigger the alarm + LEDs
2: OUTPUT, used to reset the People counter
3: INPUT, used by the people counter to increment the patron count
4: INPUT/OUTPUT, used for the wired synchronization
Weight Pedestal: 34 kg (75 lb)
Pedestal dimensions (H x W x D) Approx. 1777 mm x 640 mm x 80 mm (70 x 25.2 x 3.15 in) assembled
Connection for pedestal Supply power cable and Ethernet cable if available
Power supply 100/240 Volts AC, 0.5 A, 50/60 Hz
Power consumption 30 W
Conformity FCC Part 15, CE, EN 60950-1, EN 50364
Microchip compatibility TAGSYS C220, C320, C370 (NXP SLI), C370-L (NXP SLI-L), Tag-it
™HFI (Texas Instruments)
Operating temperature 0 to 50 °C (32 to 122 °F)
Storage temperature -20 to 60 °C (-4 to 140 °F)
Fuse on AC mains Schurter FST, 5X20mm, Time-Lag T, H, 250VAC, 500mA
Fuse on DC supply Schurter SPT, 5X20mm, Time-Lag T, H, 300VDC, 2A