User Manual

Library Stack Antenna L-SA3 User's Guide
Metallic or conductive parts must not be present in front of the active face of the antenna.
For best performance, always request an installation compliance agreement from TAGSYS
Custom Services regarding your specific installation.
The TAGSYS Antenna Tuning Kit Device may be required to verify the tuning of antennas for
a specific installation.
Figure 4: Using the Mounting Kit (Overview)
Figure 5: Using the Mounting Kit (Close-up View)
Flat-headed screw M4x12 + washer
Active face
This configuration reduces reading or writing performance (distance). For optimum performance,
the antenna must placed above the desk and not underneath.
Always ensure that metallic or conductive parts are located under the antenna.
16/24 Revision 1.0 January 2005