User Manual

56/68 Revision 2.1 December 2009
6 Operation
6.1 Theory of Operation
The RF motherboard in the electronics unit produces radio frequency (RF) electromagnetic
signals that are transmitted via the antennas in each pedestal. Each antenna transmits for a short
period, receives for a short period, and is inactive for the remainder of the time.
6.2 Starting the System
There is no ON/OFF switch. The system operates when mains power is applied plugging in the
IEC plug into the Wall mounted plug.
6.3 Normal Operation
No operating procedures are required. The system continues to operate as long as power is
supplied.
6.4 Shutdown
Once the system is set up and running, we recommend that all pedestals remain turned on at all
times.