User Manual

Medio L40 - User's Guide
48/56 Revision 2.3 July 2013
7.2 Power Supply DC Characteristics and start-up
All data applies for a +24V input power voltage and an ambient temperature of 25°C, except
specified.
Table 10: Power Supply DC Characteristics and start-up
Parameters Conditions Min Typ Max Unit Comments
Power Input
Voltage
21.5 24 26.5 V
Power Input
Current
Input Voltage = 21.6V 710 mA
RF On, 5W (Load
50Ohms load).
Input Voltage = 24V 635 mA
Input Voltage = 26.4V 575 mA
RF on, 1W 240 mA
RF On (Load
50Ohms).
RF on, 2W 335 mA
RF on, 3W 435 mA
RF on, 4W 535 mA
Input Voltage = 21.5V 134 mA
RF Off, No
Communication
port plugged or
RS232 plugged.
Input Voltage = 24V 122 mA
Input Voltage = 26.5V 112 mA
Input Voltage = 21.5V 120 mA
RF Off, Ethernet
cable plugged.
Input Voltage = 24V 110 mA
Input Voltage = 26.5V 100 mA
Input Voltage = 21.5V 136 mA
RF off, USB cable
plugged.
Input Voltage = 24V 124 mA
Input Voltage = 26.5V 114 mA
Power On
Input Peak
Current
0.6 A
Power On
Input Peak
Current
Recovery
Time
35 ms
Internal modules
are powered one
by one, that can
create several
input peak current
at product power
on.
Product start-
up time
2.7 s
Product Start-
up time
(Ethernet
ready)
3.9 s