User Manual

Medio S004 EVM
2 Certification
2.1 Occupational Health
TAGSYS EVM has been designed and tested to be in conformity with the European Standard EN
50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic
Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in
conjunction with the European Standard EN 50357 describing how to evaluate the exposure level.
The EVM has been also designed to be in conformity with Specific Absorption Rate (SAR)
standards according to FCC CFR47 and EN 50392:2004 recommendations.
Modification of any part of TAGSYS System is prohibited without the written consent of
TAGSYS. Unauthorized modifications may void the certificate of conformity of the equipment
and will also void the TAGSYS certificate of warranty.
2.2 Regulatory Notices
An RFID system typically composed of an RF emission device connected to an antenna such as
the Medio S004 EVM comprising the Medio S004 reader and the EVM with its embedded antenna.
Every RFID system is subject to national regulations that may differ by country.
The EVM is meant to be used solely for evaluation purposes. It is the responsibility of the system
integrator to ensure that the final solution meets all regulatory requirements.
The Medio S004 EVM product is primary intended for evaluation usage and as such is not
supposed to be integrated. Nevertheless it is the responsibility of the CIT (Certified
Integrators by TAGSYS) to integrate the Medio S004 EVM as described in this Integrator’s
Guide.
If the Medio S004 EVM is integrated in custom solution, it is the sole responsibility of the
manufacturer to obtain the required approvals for the customized product.
2.2.1 In Europe (CE and RTTE Directives)
The Medio S004 EVM complies (CE Declaration of Conformity granted) with the European EMC
directive.
The Medio S004 EVM complies with the requirements of the Telecommunication Terminal
Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.
October 2006 Revision 1.1 9/33