User's Guide

Power Node Reader V2 User's Guide
17/33 Revision 3.2 07/03/2019
4 Power Node Reader Communication
Interfaces
4.1 Power Node Parts
The Power Node Reader has 8 external MCX jack connector’s Antenna ports:
From the Bottom to the top left:
 RF Output Port #8
 RF Output Port #7
 RF Output Port #6
 RF Output Port #5
 RF Output Port #4
 RF Output Port #3
 RF Output Port #1
 RF Output Port #1
 5V0 DC input 2,5 A maximum micro USB socket (bottom left side of Battery Pack)
The Power Node Reader V2 can only to be powered by the recommended Power Supply Units.
Only the USB port is available for powering and charging
The main disconnecting devices for the auxiliary Power Supply Units are their IEC plug Inlets. If personal cannot reach them easily
when placed high up, do make sure the mains plug used can be isolated from a dedicated circuit breaker easily accessible.
Figure 5 shows the Power node dismantled. Left hand side the Radio Part, Right hand side the Integral Battery Pack. Further left the
8 MCX plugs are visible. Battery back should always be placed downwards for optimum integral antenna orientation.
Figure 5 : Power node Reader dismantled