User's Guide

Power Node Reader V2 User's Guide
22/33 Revision 3.2 07/03/2019
For customer’s safety in the front store and personal safety in the back store do make sure that the sticky
tape liner is removed and the stand well stuck to the surface. This will prevent the Power Node to fall on
the head of person if they inadvertently shake the furniture or fixture supporting it.
Figure 11 shows a typical installation on top of a metal or wooden surface.
Figure 12 shows the plastic stand to be used for placing the Power Node.
Figure 12 : Plastic Stand to position the Power Node Reader in Upright Position
Alternatively, Power Nodes can be placed close to the item using the metallic structure (Side Bars) of fixtures. This is particularly
convenient for dense fixture like rounder’s fixtures with up to 200 items. Figure 13 shows that plastic part. This part allows the
placing of the PN at any angle.
Figure 13: Fixture Side Bar Power Node Strap Fixation
To affix the Power Node to walls, a convenient specific fixation can be supplied as shown on Figure 14. As for the previous case, a
ZIP-Tie or raw plugs on a plaster wall would be necessary to affix the fixation. The power node or Antenna casing will simply have
to be slotted into it.