User's Guide

Power Node Reader V2 User's Guide
26/33 Revision 3.2 07/03/2019
In the present set up, the Read PN1 Read PN2 cycles will start 8 times with a pause of 56s in-between on-cycles of 2s per antenna.
Here 8 antennas in total during 2s each so 16s on time.
Figure 18 : Start of the Read PN sequence with the first PN.
Screen dump on Figure 19 shows the 2 PN activated and the number of tags read per antenna on the background DOS window.
To distinguish a given population of tags from all neighboring tags illuminated, a “-- LoadRefList – “button allows to load a given list
of tags ePC ID to be read. This will allow to get a direct Success Read Rate performance.