User's Guide

Power Node Reader V2 User's Guide
9/33 Revision 3.2 07/03/2019
1 For Your Safety
1.1 General Use
The Power Node Reader is designed to be reliable and to provide years of trouble-free service. Please observe the following general
tips:
 Take care not to scratch the device. Keep the device clean. When working with the device, use only CXIGNITED-approved
accessories.
 This device is not waterproof and should not be exposed to rain or moisture. Under extreme conditions, water may enter
the circuitry.
 Protect the device from extreme temperatures. For example, do not place the device in a windowed area where the sun
may cause extreme temperatures, and keep it away from heaters and other heat sources.
 Do not store or use the device in any location that is extremely dusty, damp, or wet.
 Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled, clean it with a soft cloth moistened
with a diluted window-cleaning solution.
1.2 Care and Maintenance
This device is a product of superior design and should be handled with care. The suggestions below will further increase the lifetime
of this device.
 Keep the device and all parts and accessories out of the reach of small children.
 Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
 Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.
 Do not store in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt
certain plastics.
 Do not store in cold areas. When the device warms up (to its normal temperature), moisture can form inside the device,
which may damage electronic circuit boards.
 Do not attempt to open the device. Non-professional handling of the device may damage it.
 Handle the device with care. Shocks may break internal circuit boards.
 Do not clean the device with harsh chemicals, cleaning solvents or strong detergents. Gently wipe the device with a soft
cloth slightly dampened in a mild soap-and-water solution.
 Do not paint the device. Paint may clog the device’s moving parts and prevent proper operation. Paint with metallic contents
may limit device performances.
 Do not bend the antenna part or lean on it.
 Do not put stress on antenna cables. Avoid bending the antenna cables to a radius of less than 1 inch (2.5 cm).
 Do not pull the cables for connecting and disconnecting. Always handle the connectors itself, either with your hands or
with an adapted tool.
 If an antenna cable is broken, position the cable such that the broken ends do not touch metal until it has been replaced.
Contact your nearest qualified CXIGNITED representative.
 If the device or any accessory are not working properly, take it to your nearest qualified CXIGNITED representative.
 Do not attempt to remove or dispose of fitted batteries. Contact your nearest qualified CXIGNITED representative or
contact.
 Remove at once any condensation using a dry and clean piece of cloth to prevent corrosion of metallic parts