User Manual

WiFi Inventory Reader
2 Certification
2.1 Occupational Health
TAGSYS WiFi Inventory Reader has been designed and tested to be in conformity with the
European Standard EN 50364 “Limitation of human exposure to electromagnetic fields from
devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and
similar applications” in conjunction with the European Standard EN 50357 describing how to
evaluate the exposure level. The WiFi Inventory Reader has been also designed and tested to be
in conformity with Specific Absorption Rate (SAR) standards FCC OET Bulletin 65 Supplement C:
(2001-01) and EN 50392:2004
2.2 Regulatory Notices
An RFID system typically composed of an RF emission device such as the WIFI Inventory Reader
connected to an antenna is subject to national regulations that may differ by country.
One important item to consider is the maximum permissible magnetic field intensity at a distance of
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US.
The WiFi Inventory Reader meets these limits.
2.2.1 In Europe (CE and RTTE Directives)
The WIFI Inventory Reader complies with the European EMC directive. (CE Declaration of
Conformity granted)
The WIFI Inventory Reader complies with the requirements of the Telecommunication Terminal
Equipment Act (FTEG) and the RTTE Directive 1995/5/CE.
It is the responsibility of the TAGSYS Reseller to install the WIFI Inventory Reader as described in
this User’s Guide or TAGSYS Documentation.
Any modification of the WIFI Inventory Reader is prohibited without the written consent of
TAGSYS. Unauthorized modification may void the conformity of the equipment to CE and RTTE
Directives and will void the TAGSYS warranty.
It is the responsibility of the CIT (Certified Integrators by TAGSYS) to install the WiFi
Inventory Reader as described in this User’s Guide or in TAGSYS Documentation.
If the WiFi Inventory Reader is further integrated in a different product, it is the responsibility
of the manufacturer of this complementary product to obtain the required approvals for this
product.
June 2007 Revision 1.1c 9/36