Installation Guide

Table Of Contents

Instructionsforbasinfaucets

Note: Do not disassemble the product under the guidance of non-professionals. The picture is for reference only.

All parts and accessories are subject to the real object.The right of interpretation belongs to our company.

If there is any change in the relevant content, please refer to the latest installation instructions issued by the company.

Thank you very much!

10.08"

3.98"

7.06"

3.15"

14.17"

5.48"

7.09"

4.72"

PAGE 1
Instructionsforbasinfaucets 10.08" 14.17" 4.72" 3.15" 7.09" 5.48" 3.98" 7.06" Note: Do not disassemble the product under the guidance of non-professionals. The picture is for reference only. All parts and accessories are subject to the real object.The right of interpretation belongs to our company. If there is any change in the relevant content, please refer to the latest installation instructions issued by the company.
PAGE 2
According to the basic size of the embedded box, use a special tool to cut the main hole on the solid wall. The depth of the hole is shown in the figure. The distance between the surface after the final treatment of the wall and the bottom surface of the hole should be considered . between 2.17"-2.56". First find a good stainless steel fixing bracket, with screws locked in the embedded box protruding position. Cold water inlet pipe Hot water inlet pipe depth2.17"-2.