Use Instruction

14
4 Cleaning and disinfection
4.1 Cleaning of the turbine
NOTICE:
 Do not immerse the turbine in hot or boiling water.
 To avoid irreparable damage to the turbine, never try to clean the turbine
under a direct jet of water or other liquids.
Correct operation of the turbine is guaranteed only if it is "clean" and free of
foreign objects that affect its movement. The presence of dust or foreign bodies
(such as hairs, sputum etc.) could slow or block the moving parts of the turbine
and make the result less accurate, or damage the turbine itself. After each use,
check the cleanliness of the turbine.
Weekly cleaning is recommended. To clean the turbine, remove it from the main
unit and seperate it from the mouthpiece. Immerse the turbine in warmy soapy
water and agitate the turbine for 2-3 minutes. Rinse in purified water and shake
gently to remove any excess water. If the device is not visually clean, the user
should either repeat the relevant previous cleaning steps untill it is clean.Then
wipe it dry with a clean soft cloth or allow to air dry on a towel. Finally store it in a
clean, ventilated, and dry place.
4.2 Cleaning and disinfection of the mouthpiece
Make sure to clean and disinfect the mouthpiece after each use.
To clean the mouthpiece, simply pull it apart from the turbine. Immerse the
mouthpiece in warmy soapy water and agitate the mouthpiece for 2-3 minutes.
Rinse in purified water and shake gently to remove any excess water. If the
device is not visually clean, the user should either repeat the relevant previous