User Manual

 Applying the Pressure Cuff

Step 1- Connect the air plug of the tubing to the air jack at the

side of the monitor. (Fig.24)

Step 2- Assemble the cuff as Figure 25. The

smooth cloth is on the inside of the cuff loop and

the metal D-ring will not touch your skin.

Step 3- Hold your left arm in front of you with your

palm facing up. Slide the cuff onto your left arm,

above your elbow. The red line on the edge of the

cuff should be approximately 0.8 to 1.2 inch (2 cm

to 3 cm) above your elbow. Align the tubing over

the main arteries at the inside of your arm. (Fig. 26)

Step 4- When the cuff is positioned correctly, pull the end of the cuff to tighten

the cuff snugly around your upper arm. You should be able to fit your index

finger between the cuff and your arm.

Step 5- Press the hook material firmly against the pile material. The top and

bottom edges of the cuff should be tightened evenly around your upper arm.

(Fig. 24)

(Fig. 25)

(Fig. 26)

HOW TO MEASURE BLOOD PRESSURE