User Manual

 Taking a Reading

Read "Suggestions before Measuring" and "Applying the Pressure Cuff"

before taking a reading. Always apply the pressure cuff before turning on the

device.

Step 1- Press the

button. All the LCD display symbols will

appear with a long “beep” sound (Fig. 28). Then cuff begins to

inflate automatically.

Step 2- After the cuff pressure is reached, the cuff begins to

deflate. When detecting pulse, the Pulse Symbol “

” will flash,

along with a beeping sound during measurement. (Fig. 29)

Note: If a higher pressure value is needed, the monitor will stop

deflation and inflate again.

Step 3- After the measurement, the monitor displays the systolic

pressure, diastolic pressure, and heart rate. (Fig. 30)

Step 4- Press

button to switch off. Or it will switch off

automatically after three minutes.

Note:

If you press the

button during the measurement, the monitor will turn off.

(Fig. 28)

(Fig. 29)

(Fig. 30)

HOW TO MEASURE BLOOD PRESSURE