User's Manual

Step 3. Display a Glucose Result
Your blood glucose test result appears after the meter counts to 0. This
blood glucose result is automatically stored in the meter memory. Turn
the meter off by removing the test strip. Discard the used test strip
carefully to avoid contamination.
When the measurement is complete, your IDEAL LIFE Gluco-Manager™ will then display your reading
automatically, and begin to communicate (if TRANSMISSION is turned ON) and you are using your
IDEAL LIFE Pod™ or Bluetooth® enabled cellular phone or device. Your IDEAL LIFE Gluco-Manager™
will notify you on the bottom of the display as to the status of your connection. Connection times
may vary depending on many factors. If a connection has not occurred, your IDEAL LIFE Gluco-
Manager™ will try to connect at a later time. Your reading will always be stored in your meter memory
for local lookup. After displaying your reading and automatically communicating the information, your
meter will automatically return to the default screen before going into sleep mode. Each time your
IDEAL LIFE Gluco-Manager™ communicates successfully to IDEA LIFE through your IDEAL LIFE Pod™
the time and date are set to ensure reliable date and time stamping of all readings.
NOTE! If you do not apply a blood sample within 2 minutes, the meter will
automatically turn off. You must remove the test strip and insert it back
again to restart the test procedure.
Functions
Instruction Manual
27
Ideal Blood Gluco Manual 9/24/07 12:25 PM Page 27