User's Manual

Step 2. Apply Control S olution
Shake the control solution vial well. Remove the cap from the control solution bottle. Place cap on
flat surface. Squeeze the vial, discard the first drop, and wipe off the dispenser tip to prevent
contamination. Squeeze the vial again to get another drop and apply the drop to the top of cap.
CAUTION! To avoid contaminating the control solution with the content of
the test strip, you have to place a drop of control solution on a clean
surface or on your finger tip first. Do not directly apply control solution
into a strip.
Step 3. Display test result
Compare the result with the range printed on the test strip vial.
The result should fall within this range.
Out of Range Results
If test results fall outside the range printed on the test strip vial,
check the “Problem Solving Guide,” below and repeat the test. IF you continue to get out of range
results, it means that the system may not be working properly. Do NOT test your blood. Contact an
IDEAL LIFE customer representative at 1-888-IDEAL-41 (888-433-2541) to resolve the issue.
Installation
IDEAL LIFE Gluco-Manager™
18
INCORRECT
INCORRECT
Mg/dL
Mg/dL
Ideal Blood Gluco Manual FEB09:Ideal Blood Gluco Manual 08 4/5/09 11:01 AM Page 18