User's Manual

29
Performing a Blood Glucose Test
Please have the meter, test strips, lancets and lancing device ready before you
start performing blood glucose tests.
1. Starting with the meter off. Press the power button to activate the meter. Or
you may directly insert the test strip into the strip slot to start measuring.
When the main page appears, tap on to initiate the blood glucose
measurement procedure
2. Perform the blood glucose test as directed on the display.
Insert a test strip.
3. Obtaining a blood sample
Use the pre-set lancing device to puncture the desired site.
After penetration, discard the first drop of blood with a clean cotton swab.
Gently squeeze the punctured area to obtain another drop of blood. Be
careful NOT to smear the blood sample.