User's Manual

21
Handheld Pulse Oximeter
STEP 3. After detecting the pulse signal, the oximeter shows the readings of SpO
2
and pulse rate on LED.
(For TD-8201B)
STEP 5. Two modes can be selected for Bluetooth communication.
(a) F-b 1 : With the meter turned off, start Bluetooth communication via
control of host device to upload SpO
2
readings. The transmission
frequency is fixed to one reading per minute. You can upload those
readings within one hour prior to the meter turned off.
(b) F-b 2 : With the meter turned on, the meter will initiate Bluetooth
transmission during measurement to upload the instant readings via
control of host device. The host device can control the time tempo for
transmission in a maximum of one reading per minute.
STEP 4. The alarm indicator will light up if the readings out of the limit setting.
► SpO
2
Symbol (%SpO
2
)
The SpO
2
symbol shows the current oxygen saturation in percentage .
► Pulse Rate Symbol ( )
The pulse rate symbol shows pulse rate in beats per minute.
► Pulse Amplitude
The strength of signal is detected by the oximeter.