User's Manual

23
Handheld Pulse Oximeter
DATA TRANSMISSION VIA BLUETOOTH
You can transmit your SpO
2
and pulse rate data from the meter to your device
(e.g. smart phone, tablet, PC…) via Bluetooth. Please contact your local customer
service or place of purchase for assistance.
Please note that you must complete the pairing between meter and Bluetooth
receiver before transmitting data.
1. With the meter off, press and hold the Advance Button (Bluetooth key) for 3
seconds. The meter enters pairing mode.
2. Turn on the Bluetooth function of your device so that it can begin searching for
the meter. When the name of the meter appears on the pairing list, select and
add it to the list.
3. On your device, the meter will be shown as a paired device, suggesting
successful pairing.
* For Android system, it’s suggested to turn off the meter while the meter is in
pairing mode. And then turn it on again to accelerate the speed for connection.
Bluetooth indicator on the blood glucose monitor:
BLUETOOTH INDICATOR STATUS
Flash Fast The meter is pairing and connecting.
Lit Solid The connection is established. The meter is
transmitting data now.
NOTE
(a)F-b 1 : With the meter turned off, start Bluetooth communication via control of
host device to upload SpO
2
readings. The transmission frequency is fixed to
one reading per minute. You can upload those readings within one hour prior to
the meter turned off.
(b)F-b 2 : With the meter turned on, the meter will initiate Bluetooth transmission
during measurement to upload the instant readings via control of host device.
The host device can control the time tempo for transmission in a maximum of
one reading per minute.