Model #TPGAZ94031 INSTALLATION GUIDE 10’X12’ Rattan Gazebo
Operation 1 Fig.1 A A B AA B Fig.1 1.Connect the supporting post (A)With post bottom plate (B)Bolt(AA).
Operation (continued) 2 Fig.2 C1/D1 C2/D2 Fig.2 AA C2/D2 G C1/D1 E1/E2 E1/E2 DD C2/D2 C1/D1 2.Connect the crossbar (C1/D1) with the crossbar (C2/D2) with bolts (DD), then, set the U-shaped bracket (G), cornice (E1/E2) in turn on the beams (C1/C2/ D1/D2) using bolts (AA).
Operation (continued) 3 Fig.3 F C2 D1 F C1 D2 F D2 C1 F C2 A D1 A A A Fig.3 AA F D1 C2 C2 D1 BB A A 3.Connect the long right crossbar (C2) and the short left crossbar (D1) to the rack (A) with bolts (BB), then connect the bracket (F) to the supporting post (A) using the Bolts (AA).
Operation (continued) 4 H2 Fig.4 H1 Fig.4 H2 H1 4.Insert the short bar (H1) into the long top bar (H2).
Operation (continued) 5 Fig.6 H2 H1 H2 H2 H1 H2 Fig.5 H1 A A A A Fig.6 Fig.5 H1 CC H2 H2 A 5-1. Connect the short bar (H1) with the bracket using the Bolts (CC). 5-2. Insert the upper long Bar (H2) into the Central Roof Connector (J).
Operation (continued) 6 Fig.8 I2 I1 D2 C1 Fig.7 D1 C2 Fig.7 Fig.8 I1 CC I1/I2 I2 C1/D1 J I2 C2/D2 I1 6-1. Connect the middle bar (I1/I2) with the U-shaped bracket (G1/G2) with bolts (CC). 6-2. Insert the middle bar (I1/I2) into the Central Roof Connector (J).
Operation (continued) 7 D1 C2 I2 I1 D2 C1 D2 C1 D1 C2 Fig.9 Fig.9 I1/I2 C2/D2 L C1/D1 AA 7.Place the cover (L) on the beam using bolts (AA).
Operation (continued) 8 M Fig.10 Fig.11 N Fig.12 Fig.10 Fig.11 Fig.12 N N M I1/I2 H1 8. Place the small canopy (M) on the long top connector pole (H2), the large canopy (N) on the short bar (H1) and the Middle bar (I1/I2).
Operation (continued) 9 Fig.13 P O Fig.14 Fig.13 Fig.14 GG A E1/E2 P B O EE 9-1. Fix the racks on the surface with the help of pegs (EE) using a loop. 9-2. Hang the mosquito net (O) and Curtain (P) on the eaves (E1/E2) by the Loops (GG), curtain outside, the mosquito net from the inside.
