User_Manual_Taisync_Pro_V1.00(ETH-ETH)-EN-20200529

Ground unit has one way of outputting received video, to a PC or laptop.

Note:

(1) To view the video on PC or Laptop, connect the ethernet port of the ground unit to the

ethernet port of a PC or a Laptop, the IP address of the PC is configured correctly.

3.2.6. Use Taisync system

1. Connect antennas to RF ports of the air unit.

2. Connect camera ethernet output to ethernet input port of the air unit.

3. Connect the PPM/S.BUS port of the flight controller to the RC port of the air unit.

4. Connect the flight controller telemetry port to the serial port of the air unit.

5. Turn on the camera and set the video format.

6. Connect a 12V DC power to the power port of the air unit and turn on the power.

7. If latest firmware is desired, connect the air unit to a PC or a Laptop using USB cable

and run Taisync PC program to upgrade the firmware of the air unit to the latest one.