User_Manual_Taisync_Pro_V1.00(ETH-ETH)-EN-20200529

34
PPM mode
Taisync standard PPM cable is used to connect with Futaba trainer cable (one end is connected
to the trainer port of futaba, the other end is 3.5mm connector). PPM mode can be used directly
without additional configuration.
5.3.Telemetry connection
The telemetry Port of air unit connects “TELEM1” Port of flight control (Pixhawk4).
6. Notes
6.1.Link performance
⚫ Interference by 2.4GHz WiFi
WiFi operates at 2.4GHz band with bandwidths of 20MHz and 40MHz. WiFI can generate
both co-channel interference and adjacent channel interference to the 2.4GHz wireless link of
a drone. Even if there is not a WiFi router is available for a WiFi device (for example, WiFi
of a phone) to connect with, a WiFi device periodically transmits beacon/probe signals. So,
when you operate a drone in the field with 2.4GHz wireless link, it is important to turn off