User_Manual_Taisync_Pro_V1.00(ETH-ETH)-EN-20200529

37
frequency of the receiver connected to the remote controller must work in different frequency
bands with the working frequency of Taisync module and have a certain isolation guarantee.
If you do not use the RC link of Taisync module, you should pay attention to the remote link
working frequency of the remote controller when using the RC link of the remote controller.
If it is in the same frequency band as the working frequency of Taisync module, it will cause
interference with each other.
Avoid interference with Taisync module by the wireless link of the remote controller or
receiver when using Taisync system.
6.3.How to select Frequency
Click “Frequency” buttion using Viulinx PC program.
On the left, you can see the RSSI curve of frequency scan.
Scan range: 2.4G WIFI bands.
The lower the RSSI value of the corresponding frequency points, the lower interference.
Please select the lowest interference frequency.