User_Manual_Taisync_Pro_V1.00(ETH-ETH)-EN-20200529

2
Ground unit antenna & feeder line × 2
（2.4G antenna for ground unit）
（2.4G feeder line for ground unit）
（1.4G antenna for ground unit）
（1.4G feeder line for ground unit）
Air Unit Cables
Power cable x1
This is used to connect the output
of a battery to the power input of
the air unit.
RJ45 cable x1
This is used to connect the ETH
output of camera to the ETH input
of the air unit.
RC cable x1
This is used to connect the
PPM/S.bus port of flight controller
to the RC port of the air unit.
Serial cable x1
This is used to connect the
telemetry port of flight controller
to the serial port of the air unit.
USB cable (Micro to Type-A) ×1