User_Manual_Taisync_Pro_V1.00(ETH-ETH)-EN-20200529

3
This is used to connect the USB
port of a PC or a cell phone, to the
Micro USB port of the air unit.
Ground Unit Cables
Power cable x1
This is used to connect the output
of a battery to the power input of
the air unit.
RJ45 cable x1
This is used to connect the ETH
output of ground unit to the ETH
input of a pc or laptop.
RC cable x1
This is used to connect the
training port of a remote
controller to the RC port of the
ground unit.
Serial cable（UART） x1
This is used to connect the
telemetry port of ground station
to the serial port of the ground
unit.
USB cable (Micro to Type-A)×1
This is used to connect the USB
port of a PC or a cell phone, to
the Micro USB port of the ground
unit.
2. Product Description
2.1.Parameters
Frequency
1.4GHz, 2.4GHz, 5.8GHz, (Customizable)
Band width
2.5MHz (uplink), 10MHz(downlink)
Power
27dBm (FCC), 20dBm (CE)
Modulation
OFDM
Constellation
BPSK, QPSK, 16QAM