User_Manual_Taisync_Pro_V1.00(ETH-ETH)-EN-20200529

4
FEC
LDPC (1/2, 2/3, 3/4, 5/6)
Duplex
TDD
Downlink throughput
2.3Mbps ~ 12Mbps
Uplink throughput
115.2kbps
Encryption
AES 128, AES 256
Interface
Ethernet, Serial, PPM/S.BUS
Dimension
77.8X47.3X23.5mm
Weight
103g
Rated voltage/current
DC12V/1.2A (or 3S lithium battery)
Working temperature
-30°C ~55°C
2.2.Air Unit Interfaces
① Power Input Port
Connect 12V power source to this port. The power source can be from a battery, or can be
from a power adaptor when the ground unit is upgraded on the ground. The power supply
recommended 3s battery.
② RJ45 Port
Connect the ethernet output of camera to the ethernet input of the air unit.
③ Serial Port (UART)
Connect this port to the telemetry port of a flight controller for telemetry communication
with the ground unit. UART singal: LVCMOS-3.3V.
④ Remote Control Port (RC)
Connect this port to the PPM/S.BUS port of a flight controller for remote control
communication with the ground unit. Pin V + can provide 5V power supply.
⑤ Micro USB Port
Connect this port to the USB port of a PC or Laptop, and use the Taisync PC program to
upgrade firmware on the air unit.
③
②
①
④
⑤