_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

8
① RF2 Port
Connect the 2nd ground unit antenna to this port.
② RF1 Port
Connect the 1st ground unit antenna to this port.
3. Installation
3.1.Air Unit Installation
3.1.1. Antenna installation
Insert the air unit antennas into the RF ports with RF cables. RF cables clicks in when
properly installed.
Note:
(1) To avoid equipment damage, install antennas before powering on the units.
(2) When install air unit to drone, avoid the antennas being blocked by parts of the drone.