_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

2. Connect camera HDMI output to HDMI port of the air unit, connect camera AV

output to AV port of the air unit.

3. Connect the PPM/S.bus port of the flight controller to the RC port of the air unit.

4. Connect the flight controller telemetry port to the serial port of the air unit.

5. Turn on the camera and set the video format to 720p or 1080p.

6. Connect a 12V DC power to the power port of the air unit and turn on the power.

7. If latest firmware is desired, connect the air unit to a PC or a Laptop using USB cable

and run Taisync PC program to upgrade the firmware of the air unit to the latest one.

1. Connect antennas to RF ports of the ground unit.

2. Adjust the remote controller to the training mode, if PPM mode is used, the remote

controller interface at the ground end is connected to the training port of the remote

control. If S.BUS mode is used, the cable connection between the S.BUS receiver

and the ground end need to be established, and the connection between the receiver

and the remote control need to be established.

3. Connect the USB port of ground control station to the serial port of the ground unit

with TTL-USB cable if you want to use Taisync’s telemetry link.

4. If video view on a PC or a laptop is desired, connect a PC or a laptop to the Ethernet

port of the ground unit.

5. Connect a 12V DC power to the power port of the ground unit and turn on the

power.