_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

1) Please check the power supply of the air and ground unit is normal.

2) Please check if air unit and ground unit is bound successfully.

3) Please check the antennas installation of the air and ground units is normal: whether the

antennas is blocked; whether the antennas connection is loose; whether the rf cable and port is

not tightened;

4) Check whether the TX frequency of the ground unit is consistent with the RX frequency of

the air unit with Taiysnc PC management software.

5) If the above steps can not solve the problem, please contact Taisync technical support

staff.

Q14: What if the downlink LED indicator of ground unit is not on?

Please follow the following steps:

1) Please check the power supply of the air and ground unit is normal.

2) Please check if air unit and ground unit is bound successfully.

3) Please check the antennas installation of the air and ground units is normal: whether the

antennas is blocked; whether the antennas connection is loose; whether the rf cable and port is

not tightened;

4) Check whether the TX frequency of the ground unit is consistent with the RX frequency of

the air unit with Taiysnc PC management software.

5) If the above steps can not solve the problem, please contact Taisync technical support

staff.

Q15: What if the Ethernet physical link LED indicator of ETH ground unit is not on?

Please follow the following steps:

1) Please check whether the power supply of the air and ground unit is normal.

2) Please check whether the RJ45 cable is normal.

3) Please check power supply of camera.

4) If the above steps can not solve the problem, please contact Taisync technical support

staff.

Q16: What if the Ethernet datel link LED indicator of ETH ground unit is not flashing?

Please follow the following steps:

1) Please check whether the Ethernet physical link LED indicator is on.

2) Please check whether there’s stream coming out from camera.

3) If the above steps can not solve the problem, please contact Taisync technical support

staff.

Q17: After connecting Taisync module, telemetry can not be connected properly?

Please follow the following steps: