_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

48
4) Please check whether the IP address configuration of the ground station and the network
camera is in the same network segment (only applicable for ETH-ETH scenario).
5) Please confirm PC IP address set as 192.168.0.X, 192.168.0.2 excluded (only applicable for
ETH/HDMI-ETH scenario).
6) Please check whether the RTSP video stream configuration for playing RTSP is correct
(only applicable for HDMI-ETH scenario).
7) Please check HDMI cable connection or USB to ETH cable connection of ground unit
(only applicable for ETH/HDMI-HDMI scenario).
8) If watch video on PC through USB to ETH convertor, make sure PC IP address set as
192.168.199.33 (only applicable for ETH/HDMI-HDMI scenario).
9) If watch video on PC through USB to ETH convertor, make sure video source choose UDP
H.264 (only applicable for ETH/HDMI-HDMI scenario).
10) Please check HDMI cable connection of air unit and HDMI camera working properly (only
applicable for HDMI-ETH/HDMI scenario).
11) Please try to power on Taisync system first, after Taisync system startup, connecting
HDMI camera (only applicable for HDMI-ETH/HDMI scenario).
12) Make sure PC windows firewall is disabled.
13) If above steps cannot solve the problem, please contact Taisync technical support staff.
Q20: After connecting Taisync module, what if the video carton or mosaic?
Please follow the following steps:
1) Please confirm whether the downlink mode configuration is reasonable.
2) Please check whether the connection of HDMI cable/Ethernet cable is normal.
3) Please check if there is interference exists, we can consider changing the working
frequency.
4) If there is no interference, whether the limit distance of communication link has been
reached.
5) Please check if peak rate of camera is approaching or exceeding the downlink mode
setting.
6) Please check real-time downlink rate via Taisync app if there’re bi-stream coming out
from camera.
7) If above steps cannot solve the problem, please contact Taisync technical support staff.
Q21: After connecting Taisync module, what if the transmission distance of the module is
short, which is not up to expectation?
Please follow the following steps:
1) Please verify whether the antenna and RF cable are installed correctly, check whether they
are Taisync standard materials.