_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

3
controller to the RC port of the
ground unit.
SBUS RC cable x1
This is used to connect the SBUS
receiver to the RC port of the
ground unit.
Serial cable (UART) x1
This is used to connect the
telemetry port of ground station
to the serial port of the ground
unit. (TTL to USB)
USB cable (Micro to Type-A)×1
This is used to connect the USB
port of a PC or a cell phone, to
the Micro USB port of the ground
unit.
2. Product Description
2.1.Parameters
Frequency
1.4GHz, 2.4GHz, 5.8GHz, (Customizable)
Band width
2.5MHz (uplink), 10MHz(downlink)
Power
27dBm (FCC), 19dBm (CE)
Video format
720P30 720P60 1080P30 1080P60
Modulation
OFDM
Constellation
BPSK, QPSK, 16QAM
FEC
LDPC (1/2, 2/3, 3/4, 5/6)
Duplex
TDD
Downlink throughput
2.3Mbps ~ 8Mbps
Uplink throughput
400kbps
Encryption
AES 256
Interface
HDMI, ETH, USB, Serial, PPM/S.BUS
Video compression
H.264/H.265
Glass to glass latency
<300ms (Camera dependent)
Dimension
77.8X47.3X23.5mm (Air unit)
77.8X47.3X23.5mm (Ground unit)