_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

4
Weight
106g(Air unit)
97g(Ground unit)
Rated voltage/current
DC12V/1.2A (or 3S lithium battery)
Working temperature
-20°C ~55°C
2.2.Air Unit Interfaces
① Power Input Port
Connect a 12V power source to this port. The power source can be from a battery, or can
be from a power adaptor when the ground unit is upgraded on the ground. The power
supply recommended 3s battery.
② RJ45 Port
Connect the ethernet output of camera to the ethrnet input of the air unit.
③ Serial Port (UART)
Connect this port to the telemetry port of a flight controller for telemetry communication
with the ground unit. UART singal: LVCMOS-3.3V.
④ Remote Control Port (RC)
Connect this port to the PPM/S.bus port of a flight controller for remote control
communication with the ground unit. Pin V + can provide 5V power supply.
⑤ Micro USB Port
Connect this port to the USB port of a PC or Laptop, and use the Taisync PC program to
upgrade firmware on the air unit.
①
②
③
④
⑤