_User_Manual_Taisync_Pro_V2.00(HDMI-ETH-ETH)-EN-20210513

6
① RF2 Port
Connect the 2nd air unit antenna to this port.
② RF1 Port
Connect the 1st air unit antenna to this port.
① Fan Ventilation Outlet
Don’t block this fan ventilation outlet to ensure effective cooling.
2.3.Ground Unit Interfaces
① Power Input Port
Connect a 12V power source to this port. The power source can be from a battery, or can
be from a power adaptor when the ground unit is upgraded on the ground. The power
supply recommended 3s battery.
② RJ45 Port
Connect the ethernet output of camera to the ethrnet input of the air unit.
③ Serial Port (UART)
Connect this port to the telemetry port of a flight controller for telemetry communication
with the ground unit. UART singal: LVCMOS-3.3V.
①