User_Manual_Taisync_V1.5.0-1(HDMI-HDMI)-EN

2
RC cable x1
This is used to connect the
PPM/S.bus port of flight controller
to the RC port of the air unit.
Serial cable (UART) x1
This is used to connect the
telemetry port of flight controller
to the serial port of the air unit.
USB cable(Micro to Type-A)×1
This is used to connect the USB
port of a PC or a cell phone, to the
Micro USB port of the ground
unit.
Ground Unit Cables
Power cable x1
This is used to connect the output
of a battery to the power input of
the air unit.
HDMI cable (Type C-Type A) ×1
This is used to connect the HDMI
output of ground unit to the
HDMI input of the monitor.
RC cable x1
This is used to connect the
training port of a remote
controller to the RC port of the
ground unit.
Serial cable (UART) x1
This is used to connect the
telemetry port of ground station
to the serial port of the ground
unit.
USB cable (Micro to Type-A)×1
This is used to connect the USB
port of a PC or a cell phone, to
the Micro USB port of the ground
unit.