User_Manual_Taisync_V1.5.0-1(HDMI-HDMI)-EN

4
Connect a 12V power source to this port. The power source can be from a battery, or can
be from a power adaptor when the ground unit is upgraded on the ground. The power
supply recommended 3s battery.
② Serial Port (UART)
Connect this port to the telemetry port of a flight controller for telemetry communication
with the ground unit. UART singal: LVCMOS-3.3V.
③ Remote Control Port (RC)
Connect this port to the PPM/S.bus port of a flight controller for remote control
communication with the ground unit. Pin V + can provide 5V power supply.
④ Micro USB Port
Connect this port to the USB port of a PC or Laptop, and use the Taisync PC program to
upgrade firmware on the air unit.
① HDMI Port
Connect the HDMI output of a camera to the HDMI input of the air unit.
① LED 1
When this LED is on, it means the air-to-ground link is connected; when this LED is off, it
means the air-to-ground link is disconnected. (Not available for air unit)
② LED 2
When this LED is on, it means the ground -to-air link is connected; when this LED is off,
it means the ground -to-air link is disconnected. (Not available for air unit)
③ Bind Button
Press this button to perform the binding operation.
①